ERPA srl

EP2304/EP2404 Series

• Phase angle operation
• Supply voltage 110/230Vac, 50/60Hz
• Maximum current 6A
• Vibration frequency 3000/6000 (3600/7200) oscillations/min.
• Stabilization of the tension on the load
• Selection of soft start time
• PNP type, start/stop remote control
• Isolated power supply for external sensor (12V/50mA)
• Version with selection of the logic control (Start /Stop) (EP2304S)
• Version with delay time before switch ON/OFF (EP2304T)
• Version with status optorelay (EP2304K)
• Metal case which provides the IP 54 protection standard. Dim.: 115(W)x140(H)x82(D) mm (EP2304 Series)
• All versions are also available in DIN rail card. Dim.: 48(W)x130(H)x120(D) mm (EP2404 Series)

EP2306/EP2406 Series

• Phase angle operation
• Supply voltage 110/230Vac, 50/60Hz
• Maximum current 6A
• Vibration frequency 3000/6000 (3600/7200) oscillations/min.
• Soft start
• PNP type, start/stop remote control
• Selection of the logic control (Start /Stop)
• Isolated power supply for external sensor (12V/50mA)
• Version with external analog input 0-10V, 0-20mA (EP2306A)
• Metal case which provides the IP 54 protection standard. Dim.: 115(W)x140(H)x82(D) mm (EP2306 Series)
• Also available in DIN rail card. Dim.: 48(W)x130(H)x120(D) mm (EP2406 Series)

EP2310/EP2410

• Phase angle operation
• Supply voltage 110/230Vac, 50/60Hz
• Maximum current 10A
• Vibration frequency 3000/6000 (3600/7200) oscillations/min.
• Stabilization of the tension on the load
• Soft start
• PNP type, start/stop remote control
• Selection of the logic control (Start /Stop)
• Isolated power supply for external sensor (12V/50mA)
• Metal case which provides the IP 54 protection standard. Dim.: 170(W)x195(H)x105(D) mm (EP2310)
• Also available in DIN rail card. Dim.: 60(W)x150(H)x130(D) mm (EP2410)

EP2311/EP2411 Series

• Phase angle operation
• Supply voltage 110/230Vac, 50/60Hz
• Maximum current 10A
• Vibration frequency 3000/6000 (3600/7200) oscillations/min.
• Stabilization of the tension on the load
• Adjustable soft start time
• Selection of the logic control (Start /Stop)
• Isolated power supply for external sensor (12V/50mA)
• Version with delay time before switch ON/OFF (EP2311T)
• Version with status optorelay (EP2311K)
• Version with external analog input 0-10V, 0-20mA (EP2311A)
• Version with feedback from accelerometer EPSV02 (EP2311S)
• Metal case which provides the IP 54 protection standard. Dim.: 140(W)x165(H)x85(D) mm (EP2311 Series)
• All versions are also available in DIN rail card. Dim.: 55(W)x155(H)x145(D) mm (EP2411 Series)

EP2315/EP2415 Series

• Phase angle operation
• Microcontroller unit, trimmer adjustment.
• Supply voltage 110/230Vac, 50/60Hz
• Maximum current 6A
• Vibration frequency 3000/6000 (3600/7200) oscillations/min.
• Stabilization of the tension on the load
• Adjustable soft start time
• PNP type, start/stop remote control
• Isolated power supply for external sensor (12V/50mA)
• Selection of the logic control (Start /Stop)
• Version with delay time before switch ON/OFF (EP2315T)
• Version with status optorelay (EP2315K)
• Version with external analog input 0-10V, 0-20mA (EP2315A)
• Metal case which provides the IP 54 protection standard. Dim.: 115(W)x140(H)x82(D) mm (EP2315 Series)
• All versions are also available in DIN rail card. Dim.: 48(W)x130(H)x120(D) mm (EP2415 Series)

EP2316B Series

• Phase angle operation
• Supply voltage 110/230Vac, 50/60Hz
• Maximum current 10A
• Vibration frequency 3000/6000 (3600/7200) oscillations/min.
• Stabilization of the tension on the load
• Adjustable soft start time
• Selection of the logic control (Start /Stop)
• Isolated power supply for external sensor (12V/50mA)
• Speed potentiometers selectable from dedicated command input
• Metal case which provides the IP 54 protection standard. Dim.: 140(W)x165(H)x85(D) mm (EP2316B)
• Also available in DIN rail card. Dim.: 55(W)x155(H)x145(D) mm (EP2416B)

EP2390 Series

• Switching mode operation
• Microcontroller unit easy to use
• Supply voltage 110/230Vac, 50/60Hz
• Maximum current 6A
• Frequency of vibration adjustable by switches from 30.0 to 140.0 Hz
• Resolution 0.1 Hz
• Stabilization of the tension on the load
• Amplitude of vibration adjustable via potentiometer
• Soft start time set by trimmer
• Delay time before switch ON/OFF set by trimmer
• PNP type, start/stop remote control
• Selection of the logic control (Start /Stop)
• Status optorelay
• Isolated power supply for external sensor (12V/50mA)
• Inputs and outputs connectors
• Version with external analog input (EP2390A)
• Versione with feedback from accelerometer EPSV01 (EP2390V)
• Metal case which provides the IP 54 protection standard. Dim.: 105(W)x160(H)x130(D) mm

EP3316 Series

• Phase angle operation
• Supply voltage 400Vac, 50/60Hz
• Maximum current 10A
• Vibration frequency 3000/6000 (3600/7200) oscillations/min.
• Stabilization of the tension on the load
• Adjustable soft start time
• Selection of the logic control (Start /Stop)
• Isolated power supply for external sensor (12V/50mA)
• Version with delay time before switch ON/OFF (EP3316T)
• Version with status optorelay (EP3316K)
• Version with double speed (EP3316B)
• Version with external analog input 0-10V, 0-20mA (EP3316A)
• Version with feedback from accelerometer EPSV02 (EP3316S)
• All versions are available in DIN rail card. Dim.: 152(W)x176(H)x70(D) mm (EP2411 Series)

EP3420 Series

• Phase angle operation
• Supply voltage 230Vac, 50/60Hz
• Maximum current 20A
• Vibration frequency 3000/6000 (3600/7200) oscillations/min.
• Stabilization of the tension on the load
• Adjustable soft start time
• Selection of the logic control (Start /Stop)
• Isolated power supply for external sensor (12V/50mA)
• Version with delay time before switch ON/OFF (EP3420T)
• Version with status optorelay (EP3420K)
• Version with double speed (EP3420B)
• Version with external analog input 0-10V, 0-20mA (EP3420A)
• Version with feedback from accelerometer EPSV02 (EP3420S)
• All versions, of 300(W)x240(H)x100(D) mm size, are on a plate for fixing in the electrical panel

EPSV01
EPSV02

Accelerometers in metal case, dim.:40(W)x40(H)x15(D)mm, with multicore cable and connector.
Standard cable 2 meters length.

DIN rail card

The DIN rail cards, made with the same electronic of the IP54 versions, are designed, for their small footprint front, to mounting in cabinets.
The DIN rail (EN50022-35) cards are equipped with remote potentiometer (standard cable 2 meters length).

NOTE

The models above represent only a part of our production.

We can provide:

• Versions with voltage up to 400V and current up to 100A.
• Versions with custom logo
• Versions with output connector

Contact us for more information about our products!